Basketball

• 

• Raptor side swing Basketball tower

• Application: Used on courts that combine tennis and basketball. The long extension allows the tower pole to be set well clear of the tennis base line. When not in use, the tower swings sideways to the fence line and locks in position. Maximum extension for this model is 4.45m. Shorter extensions are available.
   
• 
• Features: Single 150mm square main pole, twin extension arms are off-set to fold flat in the stored position, B1810 full size ply backboard, R11b ring and net, hand tool. Benefits: The off-set hinging points allow the extension arms to fold flat against each other and lock in position.
  
• ENGINEER CERTIFIED.
• FULLY COMPLIES WITH QLD EDUCATION BASKETBALL EQUIPMENT SPECIFICATIONS & TESTING - OCTOBER 2007.
  
• Application: Used on multipurpose undercover courts. The extension arm can be mounted directly to the building structure (if suitable) without the use of a main pole.

1. 

2. SW40 Wall mounted Basketball tower

3. Used for indoor multi-purpose courts where the basketball unit must swing to the side to cater for other activities.

4. ENGINEER CERTIFIED.

5. FULLY COMPLIES WITH QLD EDUCATION BASKETBALL EQUIPMENT SPECIFICATIONS & TESTING - OCTOBER 2007.

 

• 

• SR50f Basketball tower, roof mounted, forward retractable

• Used for indoor or under cover multi-purpose courts where the basketball unit must be moved to cater for other activities.
  
  The direction of retraction depends on the structural design of the roof and the amount of space available. The unit consists of a backboard, backboard frame, extension arms, cable supports, ring and net.
  
  Not included are fixing points to which the unit will be attached. Fixing points may need to be attached to the roof structure before the basketball unit can be installed. The hoisting mechanism to retract the unit is an additional item. Height adjusting frame is additional.
  
• ENGINEER CERTIFIED.
• FULLY COMPLIES WITH QLD EDUCATION BASKETBALL EQUIPMENT SPECIFICATIONS & TESTING - OCTOBER 2007.

1.  

2. SR50b Basketball tower, roof mounted, back retractable

3. Used for indoor or under cover multi-purpose courts similar to SR50f but retracts backwards to the roof.
   
   Obstacles at roof level such as lights or PA devices may determine whether forward or backward retraction is desired. Any additional roof beams required from which the basketball unit can be attached will be determined from the architectural plans. These plans are required at the time of quotation.
   
   There are several methods of retracting the units and the devices used are separate items from the basketball units. Height adjusting frame is additional.
4. ENGINEER CERTIFIED.
5. FULLY COMPLIES WITH QLD EDUCATION BASKETBALL EQUIPMENT SPECIFICATIONS & TESTING - OCTOBER 2007.

• 

• SHF Backboard height adjusting frame

• Used to change the ring height from 3.05m to 2.6m for junior players.
  
  Consisting of two frames sliding on rails, the board and ring can be adjusted from ground level using the hand tool provided. A gas lifter is fitted in the frame. Can be used with all roof and wall mounted indoor basketball units.
  
  Order separately when required.
• ENGINEER CERTIFIED.
• FULLY COMPLIES WITH QLD EDUCATION BASKETBALL EQUIPMENT SPECIFICATIONS & TESTING - OCTOBER 2007.

1. 

2. S125r Rotating Basketball / Netball tower

3. Application: For use on multi purpose courts that incorporate a 28m long basketball court and a 30.5m netball court. The main pole of the tower sits on the netball base line and allows the backboard to overhang into the basketball court by 1.2m.
   
   Features: Two piece galvanised 140mm round pole, the angled extension arm pivots at the top of the pole and is locked in position with the hand tool provided. Supplied with B1810 full size ply backboard, R11b basketball ring, NR21a netball ring and nets.
   
   Note: Supplied as a galvanised or painted item. BP150 pole padding available.
4. ENGINEER CERTIFIED. 
5. FULLY COMPLIES WITH QLD EDUCATION BASKETBALL EQUIPMENT SPECIFICATIONS & TESTING - OCTOBER 2007.

• 

• SN90r Rotating Basketball / Netball tower

• Application: For use on multi purpose courts where basketball and netball share the same base line. The main pole of the tower sits on the base line and allows the basketball backboard to overhang into the court by 1.2m.
  
  Features: The hot dip galvanised 100mm round pole pivots around the ground sleeve. The tower is locked in position at the base of the pole. Supplied with B1810 full size ply backboard, R11b basketball, NR21a netball ring and nets. A hand tool to assist in turning the tower is supplied. Note: BP100 pole padding available.
• ENGINEER CERTIFIED.
• FULLY COMPLIES WITH QLD EDUCATION BASKETBALL EQUIPMENT SPECIFICATIONS & TESTING - OCTOBER 2007.

1. BP125sq Pole padding (optional)

2. High density foam in PVC tarp covers, 2060 x 360mm, internal velcro seam.

• 

• S100 Basketball tower

• Popular choice for school basketball courts.
  
  Features: 100mm square two piece pole, pole is positioned 500mm outside the base line. Hot dip galvanised after fabrication, supplied with, B1810 full size ply backboard, R11b 300kg load capacity ring and net.
  
  Benefits: The two piece pole makes transport and installation easy. After the main pole is concreted in place, the extension arm bolts on to the top of the main pole.
  
  Note: The backboard can be substituted for all weather Polyboard, pole padding available.
• ENGINEER CERTIFIED.
• FULLY COMPLIES WITH QLD EDUCATION BASKETBALL EQUIPMENT SPECIFICATIONS & TESTING - OCTOBER 2007.

1. 

2. S125 Long outreach Basketball tower

3. This tower complies with all government and sporting authority guidelines. The 1.0m base line clearance is the minimum requirement for competitions. Used on council half courts and full size school courts.
   
   Features: Two piece 125mm square pole, the extension arm bolts onto the vertical section, hot dip galvanised finish, B1810 full size ply backboard, R11b 300kg load capacity ring and net.
   
   Benefits: Backboard oscillation is kept to a minimum by using square material (rounded corners) and making the extension arm angled. The pole is easier to install and transport in two sections, 1.0 metre clearance from court base line to the pole face allows for player safety, strongest and most sturdy basketball tower on the market.
   
   Note: The ply backboard can be substituted for Polyboard, the ring can be changed for other types, BP20 pole padding is available.
4. ENGINEER CERTIFIED.
5. FULLY COMPLIES WITH QLD EDUCATION BASKETBALL EQUIPMENT SPECIFICATIONS & TESTING - OCTOBER 2007.

• Force 10 Home Basketball tower

• Full size basketball tower for home applications. The extension arm will allow the tower to overhang a 3.0m high tennis court fence.                                
  
  Features: 100mm square pole, 1200mm extension arm, 1800 x 1050 waterproof ply backboard, R21a ring and net, rear backboard frame, black finish.
  
  Force 10 provides excellent ball rebound and provides clearance under the board for lay-ups.
   
•  
  
• Force 10/a Home Basketball tower with 1800 x 1050 mm acrylic backboard.

1. 

2. Legend Home Basketball tower

3. Tower with 2/3 sized rectangular backboard. The extension arm is high enough to clear a 3.0m tennis court fence.
   
   Features: 90mm square pole, 800mm long extension arm, sturdy construction for good ball rebound quality, black finish, B1290a rectangular shaped board, R21a ring and net.
   *Photo depicts Legend/a (Legend Home Basketball tower with acrylic backboard) 

• 

• Legend/2 Legend without pole

• Legend extension arm with plate to mount onto customers own pole.
  
  Features: 800mm long extension arm, B1290w rectangular shaped board, backboard frame, black finish, R21a ring and net.

1. 

2. Power Pro Height adjustable Basketball tower

3. The board height is fully adjustable from 2.2m to 3.05m.
   
   The height adjustment allows the whole family to enjoy playing.
   
   The main pole is 100mm square, backboard to pole distance, (with the ring set at 3050mm), is 1.2m, height is adjusted by hand crank.
   
   Supplied with 1.2m x 0.9m rectangular B1290w board and R21a ring.
   
   Other board and ring options available.

• 
  

• Waverail net tie system

• Waverail is the latest development in basketball net tie methods. With conventional ring net hooks, nets frequently tangle on the hooks, hooks often break off and players get cut fingers from net hooks when slam dunking. Advantages of waverail; the net will never get caught up, the wave shape rail will never break off, there are no sharp edges for players to get cut fingers and nets last longer due to reduced cord abrasion.

1. 
   

2. R90i 'Ozring' spring ring

3. Features: 16mm thick high tensile rim, the same patented “U” shape spring as R90c, 14mm thick support arms, protective side covers, suitable for indoor and out door use. Maintenance-free, no re-adjusting required, the spring action helps to protect players from injury.

• 
  

• R11b Pro rim ring

• (supplied with all school towers)
  
  Top class fixed ring for stadium or outdoor use. This ring will withstand slam dunking and will not bend under severe punishment. Our free replacement warranty guarantees trouble-free use for 10 years. Features: High tensile 16mm thick rim, wrap around brace, 5mm thick mounting plate and bracing, 300kg load capacity.

1. 
   

2. R12b Double rim ring

3. Suited to outdoor vandal-prone locations. Unconditional life-time warranty. Two 16mm thick rims, wrap around brace, 5mm thick mounting plate, 500kg load capacity. Ideal for council half courts.

• 
  

• R21a Standard fixed ring

• Features: 16mm thick rim, 14mm round support arms, 5mm thick mounting plate. Suitable for home use.

1. 

2. Easy change kit removable rings, brackets and tool

3. The ring mounting plate bolts directly to the backboard and allows the ring to be installed and removed with the hand tool. Kit comprises two R21r removable rings, two BR5 brackets and one BR10 hand tool. Complies with Queensland Department of Education load ratings.
   
   Features: 16mm thick high tensile rim, 14mm round support arms, 5mm thick mounting plates. Items also sold separately.