Rugby - Steel goals

1. 

2. LU6 (6m) Rugby goals

3.  Features: 6m high x 60mm dia. goal posts with cross bar galvanised and coated white.
   
   Includes: EU6 Ground sleeves and caps.
   Optional: LP76 Pole padding. 

•  

• LU9 (9m) Rugby goals

• Features: The upright posts are made in two sections. First section is 76mm, section two is 60mm dia, the sections are pinned in position, the cross bar is 60mm dia steel, all pipe is galvanised and coated white.
  
  Includes: EU9 Ground sleeves and caps.
  Optional: LP76 Pole padding.

1. 

2. LU12 (12m) Rugby goals

3. Features: The upright posts are made in two sections. First section is 89mm, section two is 76mm dia, the sections are pinned in position, the cross bar is 115 x 45 steel, all pipe is galvanised and coated white.
   
   Includes: EU12 Ground sleeves, caps and EFC300 footing cages.
   Optional: AP202 Pole padding. 

Rugby - Aluminium goals

•  

• LU9a (9m) Aluminium Rugby goals

• Features: The upright posts are made in two sections. First section is 89mm, section two is 76mm dia, the sections are pinned in position, the cross bar is 60mm dia steel, all pipe is coated white.
  
  Includes: EU9a Ground sleeves and caps.
  Optional: AP202 Pole padding. 

1. 

2. LU12a (12m) Aluminium Rugby goals

3. Features: The upright posts are made in two sections. First section is 101mm, section two is 80mm dia, the sections are pinned in position, the cross bar is 115 x 45 steel, all pipe is coated white.
   
   Includes: EU12a Ground sleeves, caps and EFC300 footing cages.
   Optional: AP202 Pole padding. 

• 

• LU18a (18m)
  Aluminium Rugby stadium goals

• Features: 18m stadium goal posts. The uprights are made from 5 sections and pinned to the cross bar. All pipe is
                                    coated white.
  Includes: EHS Hinged ground sleeves, caps and EFC300 footing cages.

Rugby - Telescopic goals

• 

• LU9t (9m) Telescopic Rugby goals

• Features: The upright posts consist of three sections, the extended length is 9m or 12m respectively while the etracted length is 4.2m, stage 1 is 76mm dia steel, stages 2 & 3 are aluminium sections which are pinned in position, the cross bar is 50mm dia steel, white finish.
  
  Benefits: Damage to rugby goals occurs when the uprights are lifted from their footing and dropped to the ground. These rugby goals can be retracted before removing from their footing and are light enough to lift without dropping.
  
  Includes: EU9 Ground sleeves and caps.
  
  Note: Other goal heights and post diameters are available. Phone us with your request.

Dual Rugby / Soccer goals

1. 

2. DRF101 (9m)
   Dual Rugby / Soccer goal

3. Features: 90mm round main posts with elbows for the soccer net, strong RHS cross bar with rugby pole sleeves, rugby uprights extend 6m above the cross bar, galvanised and coated white.
   
   Benefits: The goals are packaged in five components. The cross bar bolts onto the main soccer posts while the two rugby posts insert into sleeves on the cross bar after the goal is erected.
   
   Includes: Ground sleeves and caps.
   Optional: LP100 Pole padding. 

• 

• DRF76 (6m)
  Dual Rugby / Soccer goal

• Features: lighter duty version of DRF101. Main posts are 76mm round pipe, strong RHS cross bar with rugby pole sleeves, rugby uprights extend 3m above the cross bar, galvanised and coated white.
  
  Includes: Ground sleeves and caps.
  Optional: LP76 Pole padding.

1. 

2. DRF60 Multi-purpose goal

3. Features: 60mm round steel pipe construction. The goal mouth is 3.7m wide x 1.8m high and the rugby posts extend 1.6m above the cross bar. All galvanised materials and coated white, supplied in kit form. The net is 48ply and the mesh size is 45mm. The small mesh size allows hockey to be played as well as junior soccer and rugby.

Accessories 

• 

• Ground sleeve and cap

• Ground sleeves and caps are available for all sizes and types of Rugby goals.

1. 

2. EFC300 Steel footing cages

• 

• LP76 Pole padding

• Features: 2000mm high x 225mm diameter (76mm internal diameter) cylindrical foam fully enclosed in PVC canvas * internal vertical velcro seam.
  
  Suitable for: LU6, LU9, LU9t and DRF76 Rugby goals.

1. 

2. LP100 Pole padding

3. Features: 2000mm high x 255mm diameter (100mm internal diameter) cylindrical foam fully enclosed in PVC canvas* internal vertical velcro seam.
   
   Suitable for: DRF101.

• 

• AP202 Pole padding

• Features: 2000mm high x 225mm (120mm internal) square foam fully enclosed in PVC canvas * internal vertical velcro seam.
  
  Suitable for: LU9a, LU12 and LU12a Rugby goals