Tennis

• 

• TIW75 Internal winder net post

• The posts are made from 75mm square galvanised steel and coated with gloss two pack urethane.
  
  Post caps, name plate and handle are cast from stainless steel and polished to a mirror finish.
  
  The safety handle is removable and also drops flat against the post when not in use. For a neat appearance, the cable fits internally into both tennis posts. Internal winding of the cable is by drum and worm drive.
  
  Posts are supplied with cover plates for sleeves.
  
  Option: EP75 PVC sleeves and EL75 caps or ECC75 chain lid covers. 

1. 

2. TBW16 Barrel winder
   (Design Number 12373/2005)

3. The barrel winder is a unique winder featuring a drop down safety handle. The 16mm diameter galvanised shaft fits existing external winder posts and can be used as a replacement for old conventional winders. Made from galvanised materials and coated black, the barrel winder has no sharp edges and provides a neat appearance even when the net is removed. Ideal for applications where the net is continually removed.

• 

• TBW75 Barrel winder net post

• Ideal system for multi purpose courts. The posts are made from 75mm square galvanised steel and finished with gloss two pack urethane. There are no dangerous parts protruding from the post when the net is left unattached. Posts are supplied with TBW16 barrel winder and sleeve cover plates.
  
  Option: EP75 PVC sleeves and EL75 caps or ECC75 chain lid covers. TN22 net separate. 

1. 

2. TBW75/2 Half court net post

3. Same specifications as TBW75 but the post length is shorter for half court use. Posts are supplied with TBW16 barrel winder and sleeve cover plates.
   
   Option: EP75 PVC sleeves and EL75 caps or ECC75 chain lid covers. TN12 net separate.

• 

• TPP75 Pivoting net posts

• Ideal for courts that are used for several sports. The wheel away system is fast and convenient and does not require the net to be adjusted. One person can wheel the net out of the way in a matter of seconds and re-align it for tennis just as quick. This model has one post pivoting in a standard ground sleeve while the other post is movable on wheels. Requires one person to operate. Spans 12.8 metres
  
  Supplied in kit form with TIW75 internal winder posts. Net and ground sleeve are optional.

1. 

2. TPF75 Free standing net posts

3. Similar to TPP75 but both posts are movable on wheels. Requires two people to align. Spans 12.8 metres. Supplied in kit form with TIW75 internal winder posts.
   
   Net and ground sleeve are optional.

• 

• TC40 Tennis umpire chair

• The chair features varnished timber stairs and wide bodied seat and back rest. The canopy is made from vinyl stretched over a metal frame and is removable. Polyboard is used for the table which is hinged to one of the arm rests. A water bottle holder is also provided. The rear leg frame of the umpire chair is removable for transport purposes. Wheels are standard on the rear legs. 

1. 

2. TC25 Tennis umpire chair

3. The chair has a moulded plastic seat and back rest. The frame is made from 100 x 50mm steel section and is supplied in demountable form. All steel work is galvanised, primer coated and finished with two pack urethane.
   
   Option: Removable vinyl canopy, supplied with wheels and front skid.

• 

• TC60 Show court Tennis umpire chair

• Premium umpire chair for main courts with luxury height adjustable seat, folding table, light, mic holder, 240v GPO for esky, pneumatic wheels.
  
  Option: Removable canopy.

• 

• TN40 Tennis net

• Net made from 4mm PE mesh with double mesh along the top section, canvas tarp headband, vinyl sides and bottom, 760mm drop, plastic coated tension cable, fibreglass end rods, net spans full post width. 

1. 

2. TN22 Tennis net

3. Net made from 2.2mm PE mesh, vinyl headband and sides, 760mm drop, plastic coated tension cable. 

• 

• EP75 PVC sleeve and EC75 Cap

• Ground sleeve and cap for 75mm sq tennis net posts.

1. 

2. ECC75 Chain lid cover

3. Cover for ground sleeves when tennis posts are removed (ECC75p includes sleeve).