Menu
This is a full-size rotating & height adjusting basketball and netball system that suits courts with combined basketball and netball courts the same length.
The pole sits on the court baseline and when rotated for basketball use, the extension arm will place the backboard 1.2m inside the basketball baseline.
The gas strut assisted backboard frame changes the ring height from 3.05m to 2.6m for junior players.
The Raptor 170 basketball unit has side swinging arms designed for play areas where the backboard needs to be swung out of the way when not in use. For example, on a tennis court where the basketball hoop would usually extend out above the service area.
The Raptor 170 extension arms hinges on a mounting plate which is bolted to the main pole. The twin arms allow the board to swing and remain parallel. Arms can be locked into position when in use and also when swung to the side.
With Game Changer the ball is in your court. This height adjustable and rotating tower has the perfect features to suit your playing style, as the crank winder adjusts the basketball ring height from 3.05 metres to 2.3 metres, while the crank hand tool can be used to change the netball ring height from 3.05 metres to 2.4 metres. Along with a steel support frame and sturdy construction for good ball rebound quality, this product was built to last.
Now all the family can play with ease. The crank winder adjusts the playing height from 3.05 metres to 2.3 metres which means even the youngsters can sink a basket. Pole can be rotated to swing the board out of the way when not in use.
This tower keeps the whole family active. Both basketball and netball rings are at the regulation height of 3.05 metres and the top pole section rotates to easily switch from one sport to the other. A spring lever half way up the pole locks the pole section in either the basketball or netball position.
The Play Maker is designed with a two piece round main pole for ease of installation. Rotating pole allows the board to rotate out of the way when not in use. The unit is also supplied with a ground sleeve to allow for relocation of the unit.
The Legend pole is a simple yet innovative product designed to fit over a 3.0m high tennis court fence, obtaining a one piece main pole and a slide on extension arm. Collars are also available to butt fence rails to the basketball pole, giving this product it’s legendary title.
This full size system has a huge 125 mm square pole with painted gloss urethane finish to give it a polished touch. It can be used on tennis court,s as the extension arm will fit over a 3.0m high fence. It can suit your needs as collars are also available to butt fence rails to the basketball pole.
This is a full size system with a huge 125 mm square hot dip galvanised pole. The extension arm bolts onto the main pole and extends the full size backboard 1700mm from the pole, insuring maximum durability.
Waverail™ is the latest development in Basketball net tie methods. We use this method on all of our Basketball and Netball rings.
With conventional ring net hooks, nets frequently tangle on the hooks, hooks often break off and players get cut fingers from net hooks when slam dunking. Our Waverail™ system is designed to avoid all these problems.
All products supplied by PHS are designed in-house and all basketball towers have been Load tested to 250Kg and cycle tested to 100,000 cycles. And comply to Queensland Department of Education & Training Basketball Equipment Specifications 2017.
Top class fixed ring for stadium or outdoor use. This ring will withstand slam dunking and will not bend under severe punishment. Our free replacement warranty guarantees trouble free use for life.
Features: High tensile 16mm thick rim, wrap around brace, 5mm thick mounting plate and bracing, 300kg load capacity and Waverail net attachment (nets last longer and will not get caught up).
All products supplied by PHS are designed in-house and all basketball towers have been Load tested to 250Kg and cycle tested to 100,000 cycles. And comply to Queensland Department of Education & Training Basketball Equipment Specifications 2017.
The maintenance free spring requires no adjustment and will not sag over time. The ring has a 50mm wide wrap around brace providing a better visual target, a 16mm high tensile rim, rubber cushioned spring return, safety side covers and Waverail net tie system that will never tangle the net.
This is our standard backboard provided with all basketball towers. The backboard is made from polyvinyl which does not deteriorate or rot in the weather like plywood does. Polyvinyl also has reduced ball impact noise and is 100% UV stable.
Sizes available:
B1290p: 1200mm x 900mm
B1810p: 1800mm x 1050mm
Sizes available:
B1290p: 1200mm x 900mm
B1810p: 1800mm x 1050mm
Our clear acrylic backboard improves the look and feel of your whole basketball unit. The acrylic backboard will give your basketball tower that professional look you’ve always wanted.
Our glass backboard is the top of the range backboard. Glass is used for competitions and those serious about having the best looking tower around! The clear appearance gives a professional look and its ball rebound quality is unmatched. As used in the NBA.
Glass backboards has unbelievable true rebound action and is more rigid and durable than all other backboard material.
Sizes available:
B1290p: 1200mm x 900mm
B1810p: 1800mm x 1050mm